New Media Influence in Indegenous Communities - 945 Words

Indigenous people groups over the world have been influenced by the presentation of advances of remote societies for several years. Some have not incredibly changed their lifestyles, while others have totally changed identities toward one self, whole social orders and perspectives. Current advances, particularly telecommunication and machine innovations, permit indigenous assemblies to partake in the bigger social orders and economies around them. These innovations likewise, empower them to save and advertise their lifestyle for their relatives and for our aggregate learning of mankinds history. (Rekhari 2009) Various social researchers have addressed the potential held by information frameworks to structuring and supporting group. At†¦show more content†¦Aboriginal cultural custodians, knowledge owners, community leaders and the Indigenous academia has realized the need to act to preserve the evidences of the Australian Aboriginal heritage and also their culture itself to give young and future generations of Australian Aborigines a chance to preserve their Aboriginal identity. (Gard and Salvatore 2005) Such a system could be used by government agencies or remote communities themselves to deliver messages about visitors to the community, emergencies; cultural business, sporting events. Digital television, Indigenous remote communities, messaging, viability, sustainability background There are hundreds of remote communities mostly Indigenous and ranging in size from a couple of hundred people to very small, sometimes temporary, communities of a few families. (McGinley 2006) In conclusion there are not much issues in confronting the configuration of aboriginal virtual legacy situation, either been relevant and social correctness and authenticity. We still all have to make a serious connection on earth with the help of the new technologies available. Bibliography Gard, Stephan, and Bucolo Salvatore. Capturing Australian Indigenous Perception Of Virtual Landscape. Virtual Realily at Work in the 21st Century: Impact on Society., October 2005. Ginsburg, F, L Abu-Lughod,

Tobacco Products A Dangerous And Potentially Fatal Threat

Sean Bower Ms. Crecelius Honors English II - Period 9 17 December 2013 Tobacco Products: A dangerous and potentially fatal threat to future generations that should be replaced or erased Every day, more than 3,600 teens smoke their first cigarette and about 900 teens become daily smokers. Over 15 billion cigarettes are sold worldwide daily. Approximately one out of seven people smoke tobacco products which is about 1,142,857,143 people! 5 million of these smokers die every year and it costs them over 4,000 dollars each year to maintain their torturing addiction. Tobacco product consumption is a serous problem that must be resolved. These products are advertised as a product that will make users look cool and sexy to all people including kids. The more children that are attracted to this deadly product, the more deaths the world will have from the diseases that tobacco causes. Although tobacco products are the leading preventable cause of death and should be illegal, it is nearly impossible to achieve this goal. Instead, the tobacco industry should focus its efforts on creating a much healthier product for smokers. A major reason why so many people participate in using tobacco products is because of the wide variety of different tobacco goods. Tobacco is a leafy plant that is grown all around the world. This leafy plant is an extremely addictive substance because it contains the chemical nicotine. Just like any other drug, such as heroine or cocaine, nicotine changes the wayShow MoreRelatedTobacco Products : A Dangerous And Potentially Fatal Threat2407 Words   |  10 PagesSean Bower Ms. Crecelius Honors English II - Period 9 17 December 2013 Tobacco Products: A dangerous and potentially fatal threat to future generations that should be replaced or erased Every day, more than 3,600 teens smoke their first cigarette and about 900 teens become daily smokers. Over 15 billion cigarettes are sold worldwide daily. Approximately one out of seven people smoke tobacco products which is about 1,142,857,143 people! 5 million of these smokers die every year and it costs themRead MoreThe Dangers of Smokeless Tobacco Essay1288 Words   |  6 PagesThrough with Chew Using smokeless tobacco does not require inhaling smoke into the lungs, so therefore it is completely safer than smoking cigarette, right? Wrong. Unfortunately, â€Å"smokeless† and â€Å"harmless† are not interchangeable terms; as a matter of fact, there is absolutely no such thing as smokeless tobacco. Smokeless tobacco products come in many different shapes and forms, such as dip, chew, and snuff. These types of products allow users to get a kick of nicotine without having to inhale theRead MoreTobacco Is A Common Pleasure Among Millions Of Americans1515 Words   |  7 PagesTobacco use is a common pleasure among millions of Americans. Tobacco use is a great source of disagreement, and people either support it or disapprove of it. Smoking is a personal choice, and we need to accept that adults can decide to harm themselves (hypothetically) to some degree as long as there not harming another person. We also need to stop criticizing people about the decisions others c hoose to make, so long as you don’t choose to do it, it shouldn’t be a problem if someone decides differentlyRead More Guns and Violence Essay1548 Words   |  7 Pageshandguns, which has been an attempt to stop the violence in districts. Many are searching for the correct way to regulate dangerous or potentially dangerous weapons, by doing this they would make the ownership of them illegal (Hoxie 474). But is there any reason they should ban something just because it can kill someone, many believe not due to the fact that tobacco products kill people and its not illegal (475). Many believe that if guns are made illegal that there will be more violence due toRead MoreThe Benefits of Legalizing Marijuana1631 Words   |  6 PagesMarijuana is a naturally grown plant that has beneficial properties and the ability to create textiles, paper products, and other goods. Marijuana is currently illegal in many states in the United States. The legalization of Marijuana will pro duce enormous tax revenue, reduce crime, give us a renewable resource, and give sick and suffering patients a new effective medicine. The legalization of Marijuana in the United States would both benefit the well-being of its citizens as well the economy. TheRead MoreFarming Is The Nation s Most Important And Noblest Profession1843 Words   |  8 Pagesor young boys helping there father feed the family herd. Maybe you even think about thousands of acres of corn land in Iowa. Whatever it is I can assure you farming is the nation’s most important and noblest profession. Today farming is seen as a dangerous profession, that’s not necessarily the case, it is true that many people are injured and even killed on farms each year. In 2012 alone three hundred and seventy-four farmers and farm workers lost there lives due to work related injuries, and everyRead MoreImpacts of Biopharming3388 Words   |  14 Pagesreally become a reality? The answer is YES! This scenario is probable. The Food and Drug Administration (FDA) does not require safety testing and refuses to monitor the effects of genetically modified (GM) foods on public health. GM crops may produce dangerous allergens or toxins that are difficult to detect, therefore increases the likelihood that GM crops will make people sick in new, hard-to-track ways. GE seeds may just be the seeds of deception. These wonder seeds are designed to not only bump upRead MoreThe Effects Of Coal Mining On The Health Of The Body3187 Words   |  13 Pagesadministration, the United States Environmental Protection Agency began conducting more reviews and now they have issued â€Å"comprehensive guidance† which was designed to strengthen requirements regarding mountain top removal (MTR) and other surface mining products (Holzman 2011). The more an organism is exposed to coal-mining, the more health problems they will face. Simply being in the mines for certain duration of time can lead to several diseases such as â€Å"dust disease† otherwise known as PneumoconiosisRead MoreIndoor Air Quality And Environmental Health Essay2305 Words   |  10 Pagesexposure to the source of the pollution. The other health effects that may show up years after exposure has occurred are considered long-term effects such as respiratory diseases, heart disease, or cancer, and they can be severely debilitating or fatal. Indoor Air Assessment Assessing and managing health risks are important because this can prevent poor IAQ in building environments. Since the majority of people spend most of their time in indoor spaces, a risk assessment is beneficial because someRead MoreSin Tax in the Philippines4297 Words   |  18 Pagescigars and liquors. I. Introduction Sin tax is a tax levied on a certain goods and services that are seen vices, such as alcohol, tobacco and the like. Sin tax is used for taxing activities that are considered undesirable. These types of taxes are levied by the government to discourage individuals from partaking in such activities without making the use of the products illegal. Like other taxes, sin tax also provides a source of government revenue. Since the Senate wants to pass or reform the Sin

Coffee Vending Machine Modelling Samples †MyAssignmenthelp.com

Question: Discuss about the Coffee Vending Machine Modelling. Answer: Identification of Business and IT Goals For the prepared model, there are two distinct goals that are to be achieved. These goals are as follows. Business Goal The business goal for this scenario is to manage the transaction for coffee cup purchase efficiently. Transparency is required in the entire system such that it does not cause loss of money for the customer (Thayananthan, Alrehily and Fallatah 2015). In addition to fixing the transparency of the transaction system, adding different varieties of coffee will further benefit the business goal for the use of coffee vending machine. IT Goal The IT goal of the scenario is to develop a fully working IT model for managing the activities of the vending machine (Bodhale and Kulkarni 2016). These activities include accurate processing of the paid amount, automated entry to the database after each transaction, automated updating the inventory once a coffee cup is dispatched to the customer and others. Scenario Model The scenario model is as follows. Figure 1: Coffee Vending Machine Model (Source: Created by Author) References Bodhale, A.P. and Kulkarni, J.S., 2016. Dispenser Machine for Beverages with User Preferences from HMI. i-Manager's Journal on Embedded Systems, 5(3), p.25. Thayananthan, V., Alrehily, A. and Fallatah, R., 2015. Automata Design with Time Complexity for Intelligent Vending Machine based on Visual Automata Simulator. In IEEE 17th International Conference on Computer Modelling and Simulation, UK (pp. 159-164).

The Truth About The Sounds Of Silence Essays -

The Truth About The Sounds Of Silence Despite the efforts through various organizations and through the teachings of the many lessons of history, racism is still rampant in our society. While the level of discrimination and hatred has decreased considerably since as early as fifty years ago, there is still much to be done in order to eliminate prejudice. But, what can one do to contribute to racial equality? I realize that everyone's story varies, but I'll describe to you of my own experience and how I was able to learn from it... Last year, I heard many insults aimed towards my peers. But, one really stuck out: The word Jew. The story is almost always consistent every time: My friends and I gather every morning in the hallway. We talk. We start to storm each other with insults. This is all fun and games until someone shouts out the word Jew, and points to an opposing party. I never did approve of this degradation towards and innocent people, and yet, I remained unspoken during the entire tribulation. To this day, I am not completely certain why I did what I did. Perhaps it was because I was feeling apprehensive of standing out from the crowd. Or, perhaps I thought that merely calling someone a Jew was not a bad insult and that I was senseless for not joining the crowd. Whatever the poor justification I used, I now know differently. These comments are based on the notion that one's culture is ideal. They, therefore, create wrongful stereotypes about another's inferior traditions and, more often than not, lead to hatred. Remaining indifferent in the face of this oppression only proves that one condones the activity. We must learn to speak against all forms of racism. For if we chose not to do so, then our predicament will retrogress even further. Social Issues

Super Volcanoes informative paper free essay sample

What f I told you that something like the volcano that is thought to have killed all but 15. 000 members of the human population 74,000 years ago is underneath the US. as I speak? Lucky for all of us humans, we may have to face another volcano like this soon, since there is a historically destructive one in Yellowstone National Park. The volcano that possibly killed a majority of the human species and the volcano that currently resides In Yellowstone are both a special kind of volcano called d super volcano, which you will be Informed about today. A super volcano is defined as a volcano capable of spewing more the 1000 km3 of ash, pumice, or lava when it erupts. -according to the US geological survey, Volcano eruptions are measured using a unit called the VEI. To be exact the VEI is used to represent the explosiveness, amount of material ejected, and height of column from a volcano. We will write a custom essay sample on Super Volcanoes informative paper or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page To be a super volcano, a volcano must have a VEI of 8. A volcano with this much power doesnt usually look Ilke an average volcano. Instead of a cone shape, the lava In a super volcano resides underneath the earth and the volcano resembles a arge crater with a slight bulge in the center. This large crater around the center ot the volcano is a caldera. A caldera is a large basin-shaped volcanic depression resulting from the explosion of a center of a volcano. When a super volcano erupts, a few things happern First, a magma pool must form underground. The magma rises to the earths crust but cannot break through, causing pressure. When the pressure becomes too great, the crust bursts, allowing the lava to escape. The area where the lava resided becomes the caldera. There are more than 1900 active volcanoes In the world today according to After erupuons Ilke this In the past, the world has been thrown into a state of global cooling, like the ice-age. This is a volcano with the potential to wipe out a good portion of the human race. However, scientists assure us that we have nothing to worry about. They monitor activity at Yellowstone. and have found no evidence to suggest that there will be another eruption in the near future. Even if Yellowstone did erupt soon, theres no guarantee that it would be on Of2 70,000 years ago, according to the US geological Survey. In summary, a Super volcano is a volcano capable of emitting more the 1000 km3 of ash, pumice, or lava when it erupts, and having a rating higher than VEI 8. A super volcano is characterized by a caldera resulting from past eruptions. The most commonly known super volcano is in Yellowstone National Park, and has had 3 large, significant eruptions in the past 2 million years. One day, it will erupt with the magnitude of past eruptions yet again, and it will be devastating. All we can do is observe the volcano and possibly have a warning when it changes life as we know it.

Utilization of Nanotechnology essays

Utilization of Nanotechnology essays Since the beginning of time, man has always been at work creating and developing new tools and objects to further aid our race, and make our life easier as the decades go on. From the cave man discovering fire, to the creation of atomic bomb, the human race has always developed new forms of technology, good or bad. At this current stage and age in our existence, we have stumbled upon probably the most useful technology ever devised by man, and that is Nanotechnology. Nanotechnology is defined as the branch of engineering that deals with things smaller than 100 nanometers especially with the manipulation of individual molecules. Nanotechnology has allowed us to delve into things that were once thought impossible, and only lived in science-fiction products such as star trek. However, because of this engineering branch we might one day be able to say Beam me up Scotty as Nanotechnology deals with the manipulation of molecules, and arranging them as we see fit. Who knows, we may some day, though the use of this gifted breakthrough in science, may very well be able to replicate every cell of the human body, and transport it through some electrical means, which are managed by a computer devised of the same technology, and transfer it to another specified location. Thus we have a transporter such as the ones we loved to see function in Star Trek. Thus is the concept of Nanotechnology, and what it has to offer us. Seeing what it has done already, who knows what awaits for us in the near future. ...

Land Register Act Essay Example | Topics and Well Written Essays - 1000 words

Land Register Act - Essay Example The Act of 2002: An important change brought about by the new law is the introduction of a new system in relation to adverse possession for registered land. The effect; It will make registered land virtually squatter-proof and bring clients owning unregistered properties to voluntarily register to the Land Registry. Prominent among these is the increase in the number of dispositions and interests capable of registration. These include, naming a few: Most prominent among the above is the compulsory requirement to register leases of 7 years and considered to have the biggest impact in practice. This will have an overwhelming effect on leases of 3 years and more as well. As leases are the most common type of property transaction, the new law has attracted criticism, for its bureaucracy and increased costs. The Act's objective that the Register should show transparency in all registered titles and the overriding interests to which a property is subjected to, will be reduced and in some cases lose this overriding status after 10 years. For the first time, overriding interests will be treated differently on first registration and on subsequent dealings. The protection of third party interests over registered land and the abolishment of cautions and inhibitions are an addition to the new law. Notices and restrictions can be agreed upon with the registered proprietor's consent, or Unilateral, without consent. Unilateral notices will take the place of cautions and a registered proprietor will be informed of the registration of such a notice by the Land Registry. The registered proprietor has the discretion to contest the notice and can apply to have it removed. Restrictions, apart from its present usage, will be used in cases of insolvency, where inhibitions are currently used. Another major point of discussion is the right to access of documents related to a registered title in leases and charges by the Land Registry. This ruling is seen to be quite encouraging, and is a positive move to prevent misappropriation of property by unscrupulous methods. Along with this, is the appointment of an independent adjudicator for the Land Registry who has the power to determine contested applications. However, the Act also allows any decisions of the adjudicator to be appealed through Court (Naomi Druiff & Taylor Joynson Garrett, 2002)2. 3.0 Summary Land registration has never held the centre-stage as it does

Corporation Law case study Essay Example | Topics and Well Written Essays - 2500 words

Corporation Law case study - Essay Example The main issue is if the selling of stocks and the responsibility of the directors. Its nesassry to tell a few words about dealing with outsiders. Also the seconde question deals with the problem of outsider trading. Express authority4 In the context of a Co, actual authority will be conferred by the Co const or, in its absence in accordance with the replaceable rules of the CA. In general, in the case of any Co with more than 1 D, authority is vested in the Board collectively - s 198A Any act lying outside the authority of the D's or the Board can be performed by the members in general meeting - s 198A(2) Implied authority of Co officers The Board may appoint someone as Managing Director (must be one of their own number - replaceable rule s 201J), conferring on that person the powers of the Board - s 198C(1). According to the articles concerning duties of directors one of theliste every managing director is obliged to act in good faith in the best interests of the corp and to use powers for a proper purpose - s 181.5 In this case the managing director haven't acted in the best iint of the company because the board of directors had rejected the contract. So mister Lam is responsible for comensation the losses to the company. Also he have to take responsibility of information given about the information given on the new project because he promised the increase in productivity of about 100%. The law prohibits insider trading. Generally, D's do not owe a fiduciary duty to individual s'holders Percival v Wright [1902] 2 Ch 421 - shareholders offered to sell shares to directors - directors already negotiating to sell shares at much higher price but did not inform s'holders - court held no fiduciary duty to shareholders,... The second question concerns different articles of the corporate law. There is some information about the corporations' law. The main issue is if the selling of stocks and the responsibility of the directors. Its nesassry to tell a few words about dealing with outsiders. Also the seconde question deals with the problem of outsider trading. According to the articles concerning duties of directors one of theliste every managing director is obliged to act in good faith in the best interests of the corp and to use powers for a proper purpose - s 181.5 In this case the managing director haven't acted in the best iint of the company because the board of directors had rejected the contract. So mister Lam is responsible for comensation the losses to the company. Also he have to take responsibility of information given about the information given on the new project because he promised the increase in productivity of about 100%. The law prohibits insider trading. Percival v Wright [1902] 2 Ch 421 - shareholders offered to sell shares to directors - directors already negotiating to sell shares at much higher price but did not inform s'holders - court held no fiduciary duty to shareholders, and so they could not recover. Primary prohibition in s 1043A(1) - insider may not purchase or sell shares in Co or get anyone to do that for him.

Crito Research Paper Example | Topics and Well Written Essays - 1250 words

Crito - Research Paper Example Euthyphro identifies with Socrates because people laugh at him when he predicts the future. On the other hand, Euthyphro is accusing his father of murder. His father, by neglect, had let a servant who had killed another servant die in a ditch while awaiting instruction on what to do with him. Socrates taunts Euthyphro if he has such a precise knowledge of right and wrong and if so, whether what he is doing is not a wrong. The debate shifts to the discussion about what is holly and what is unholy, Socrates wants to learn from Euthyphro. Euthyphro argues that not prosecuting offenders because they are your relatives is unholy. He proves this by reminding Socrates of the god Zeus who is said to be the most just. Zeus, he says, bound his father Cronos because he had devoured his own sons. Socrates is indeed doubtful about the tales about the gods. Socrates asks Euthyphro to provide him with a standard by which to measure things as holy or unholy. Euthyphro says that holy things are dear to gods, and unholy things are not dear to the gods. Socrates remarks that gods also argue until they fight. He also points out that such arguments can only be about right or wrong. Socrates then brings out the flaw in such a definition by leading Euthyphro to admit that something considered dear to the gods is also, on the other hand, not dear to the gods; otherwise, they would not argue and fight. They both proceed to come up with another definition of purity. That what all the gods hate is impure and what they all love is pure, but what some gods love and others hate is both pure and impure. Unexpectedly, Socrates also punches holes in this definition. He asks whether the holy become holy because the gods love them or the gods adore them due to their holiness. They then agree that which is precious to the gods is also precious to them because they love it and not the other way round. This, Socrates points out is a contradiction and continues to demand another distinction between holy and unholy. Euthyphros, at this point gives up, but Socrates continues trying to come up with a distinction. He later proves that fear does not always result to reverence but reverence results to fear, which goes against the words of a poem on Zeus. On that, Socrates proves that piety is only a part of the bigger concept of justice. Euthyphros then asserts that piety is a part of justice, which concerns the gods. The word he uses ‘attention’ leads Socrates to enquire whether it is the attention that improves something. Euthyphro then gives another definition. That piety is sacrificing and praying to the gods. He expresses the idea of doing business with the gods. Socrates also wants Euthyphro to state to what benefit the gifts to the gods are. Instead, he says they are a show of honor and esteem. Thereby he admits that piety depends on what the gods like, which they had assumed not to be the case. The discussion becomes circular, and Euthyphros abandons the dialogu e. According to J. Adam, Euthyphro represents Plato’s perception on the Athenian orthodoxy that was common. Euthyphro represents the mindset that led to the murder of Socrates (Berversluis 161). Euthyphro is an example of a- know- it- all, ignorant of his ignorance. He flaunts his knowledge in matters of religion and even adopts a fatherly tone towards Socrates. He is overconfident and uncritical to the extent that he does not realize that Socrates is not taking him

The Turbidity Test for Pasteurized Milk

The Turbidity Test for Pasteurized Milk Milk and dairy products, such as cream and yoghurt, are an important food group in the food pyramid. This food group provides us with calcium, which is not only crucial in strengthening our bones, but also important in many biological processes, such as facilitating the release of neurotransmitters that transmit nerve impulses across a synapse. Since dairy products serve such importance in our diet, dairy products manufacturing industry takes extra precaution in ensuring that these products meet the guidelines set by statutory bodies, one of which is that the maximum lactic acid content allowed in milk is 0.15% w/w. Hence, the industry will employ various methods to determine the quality of milk. As such, in order to better understand these industrial methods, 2 groups of experiments relating to titratable acidity (TA) of selected foods and turbidity test for pasteurized, UHT and sterilized milk were carried out. The titratable acidity test allows us to determine the titratable acidi ty of a sample as lactic acid (for dairy products) or citric acid (for lemon curd) equivalent. Basically, TA, as an acid equivalent, of a food product measures the total amount of that particular reference acid in the selected food. This reference acid is the major acid component, amongst all types of acid present in the food, which we want to quantify. TA is different from pH as pH only measures the [H+] dissociated from the acid molecules. Hence, TA is a more accurate measure of the degree of spoilage of dairy products than pH. The turbidity test however, serves a different function in terms of quality control. It is usually used by the industry to test if sterilized milk products have been sufficiently sterilized. Titratable Acidity of Selected Foods Materials Phenolphthalein as indicator 50.00ml burette 10.0ml graduated pipette White porcelain basin Magnetic stirrer Experiment 1: Titratable Acidity of Milk Pasteurized milk (Farmhouse Fresh Milk), expires on 20/9/12 UHT milk (Marigold UHT Full Cream), expires on 15/6/13 0.01M sodium hydroxide (actual concentration is 0.0107M) Experiment 2: Titratable Acidity of Cream Sour cream (Bulla Sour Cream), expires on 14/9/12 Yoghurt (FN Alive Yoghurt), expires on 11/9/12 0.1M sodium hydroxide (actual concentration is 0.105M) pH meter Experiment 3: Titratable Acidity of Lemon Curd Lemon curd (Waitrose lemon curd), expired on Feb 12 0.1M sodium hydroxide (actual concentration is 0.105M) Methods Titration of selected food products against NaOH of known concentrations were carried out in order to determine the titratable acidity of these food products. The titratable acidity in lactic acid or citric acid equivalent was then determined by via stoichiometric ratio of the acid to the amount of NaOH, as seen in the stoichiometric calculations below. 3 sets of titrations for 3 different groups of food products, mainly pasteurized milk and UHT milk, sour cream and yoghurt, and lemon curd, were carried. Experiment 1: Titratable Acidity of Milk 10.0 ml of pasteurized milk was transferred to a white porcelain basin. 1.0 ml of phenolphthalein indicator was then added to this sample. The burette was filled up with 0.01M NaOH and then titrated against the pasteurized milk sample. End-point of titration was identified when a pale pink colouration persisted for at least 10 s. Initial and final burette readings were recorded in Table 1 below. The procedure was repeated thrice for both pasteurized and UHT milk. Experiment 2: Titratable Acidity of Cream 10.00 g of sour cream was transferred to a white porcelain basin. 10.0 ml of water was added to the sample and mixed and pH was then measured. 1.0 ml of phenolphthalein indicator was added to the diluted sample. The burette was filled up with 0.1M NaOH and then titrated against the sour cream sample. End-point of titration was identified when a pale pink colouration persisted for at least 10 s. Initial and final burette readings were recorded in Table 2 below. The procedure was repeated thrice for both sour cream and yoghurt. Experiment 3: Titratable Acidity of Lemon Curd 10.00 g of lemon curd was transferred to a white porcelain basin. 10.0 ml of water was added to the sample and mixed. 1.0 ml of phenolphthalein indicator was added to the diluted sample. The burette was filled up with 0.1M NaOH and then titrated against the lemon curd sample. End-point of titration was identified when a pale pink colouration persisted for at least 10 s. Initial and final burette readings were recorded in Table 3 below. The procedure was repeated two more times. Results Experiment 1: Titratable Acidity of Milk Table 1: Titration of pasteurized and UHT milk against 0.01M NaOH Milk sample vol. of milk measured (ml) average vol. of milk (ml) initial burette reading (ml) final burette reading (ml) vol. of NaOH used (ml) average vol. of NaOH used* (ml) ÂÂ  Pasteurized Milk 10.0 10.0 50.00 37.65 12.35 12.35 10.0 37.65 25.15 12.50 10.0 25.15 12.80 12.35 ÂÂ  UHT Milk 10.0 10.0 50.00 37.70 12.30 12.30 10.0 37.70 25.30 12.40 10.0 25.30 13.00 12.30 Pasteurized Milk CH 3 CH OH C O- Na+ O CH 3 CH OH C OH O + NaOH Ã   + H2O (1) Amount of NaOH used = (Average vol. of NaOH used) x [NaOH] = (12.35/1000)(0.0107) = 1.32 x 10-4 mol From (1), lactic acid : NaOH is 1:1 amount of lactic acid in 10.0ml of pasteurized milk = 1.32 x 10-4 mol Concentration of lactic acid (in mol/100mL) equivalent in pasteurized milk = (1.32 x 10-4) / (10/100) = 1.32 x 10-3 mol/100mL Concentration of lactic acid equivalent in g/100mL in pasteurized milk = (molar concentration (in mol/100mL) of lactic acid equivalent) x (molar mass of lactic acid) = (1.32 x 10-3)(90.08) = 0.119 g/100mL UHT Milk Amount of NaOH used = (Average vol. of NaOH used) x [NaOH] = (12.30/1000)(0.0107) = 1.31 x 10-4 mol From (1), lactic acid : NaOH is 1:1 amount of lactic acid in 10.0ml of UHT milk = 1.31 x 10-4 mol Concentration of lactic acid (in mol/100mL) equivalent in UHT milk = (1.31 x 10-4) / (10/100) = 1.31 x 10-3 mol/100mL Concentration of lactic acid equivalent in g/100mL in UHT milk = (molar concentration (in mol/100mL) of lactic acid equivalent) x (molar mass of lactic acid) = (1.31 x 10-3)(90.08) = 0.118 g/100mL From the calculations, it can be seen that both the titratable acidities of pasteurized milk and UHT milk in lactic acid equivalent are below 0.15%, the maximum allowed titratable acidity of milk in lactic acid equivalent. As such, both samples are deemed safe for consumption. The titratable acidity of pasteurized milk is also observed to be slightly above that of UHT milk by a very minute concentration of 0.001 g/100mL. This suggests that pasteurized milk contains slightly more microbes than UHT milk, which goes in tandem with the properties of pasteurized milk. This is because pasteurized milk is heated to about 65oC for at least 30 minutes in order to preserve the flavor of milk, while UHT milk is heated at 135oC for about 2 seconds6. Hence, fewer microbes are killed in pasteurized milk than UHT milk. As such, pasteurized milk will have slightly higher lactic acid concentration which is produced from the fermentation of lactose by microbes. However, the magnitude of difference of 0.001 g/100mL obtained from the titration results is too small to make the above conclusive deduction. The average vol. of NaOH used is almost identical for both milk samples as there is only a difference of 0.05 ml, making the titration results somewhat anomalous. The main reason for this anomaly is the subjectivity of the end-point of titration. The colour change of phenolphthalein from colourless to pale pink is very difficult to ascertain by naked eye for the inexperienced, unlike workers in this industry who carry out large volumes of titrations every day. As such, the faint pink that I observed in pasteurized milk is most probably not the true end-point of titration or it could be that the faint pink I observed in UHT milk is over the end-point of titration for UHT milk. Experiment 2: Titratable Acidity of Cream Table 2: Titration of sour cream and yoghurt against 0.1M NaOH Cream sample pH of sample average pH mass of sample (g) average mass of sample (g) initial burette reading (ml) final burette reading (ml) vol. of NaOH used (ml) average vol. of NaOH used* (ml) ÂÂ  Sour Cream 4.48 4.49 10.00 10.00 50.00 44.60 5.40 5.40 4.50 10.01 44.60 39.20 5.40 4.50 9.99 39.20 33.80 5.40 ÂÂ  Yoghurt 4.43 4.38 10.01 9.99 50.00 37.90 12.10 12.30 4.34 10.00 37.90 25.60 12.30 4.38 9.98 25.60 13.30 12.30 Sour Cream Amount of NaOH used = (Average vol. of NaOH used) x [NaOH] = (5.40/1000)(0.105) = 5.67 x 10-4 mol From (1), lactic acid : NaOH is 1:1 amount of lactic acid in 10.00g of sour cream = 5.67 x 10-4 mol Mass of lactic acid in 10.00g of sour cream = (amount of lactic acid) x (molar mass of lactic acid) = (5.67 x 10-4)(90.08) = 0.0511g Concentration of lactic acid equivalent (in %w/w) in sour cream = (mass of lactic acid in 10.00g of sour cream) / (average mass of sour cream) x 100% = (0.0511) / (10.00) x 100% = 0.511% (w/w) Yoghurt Amount of NaOH used = (Average vol. of NaOH used) x [NaOH] = (12.30/1000)(0.105) = 1.29 x 10-3 mol From (1), lactic acid : NaOH is 1:1 amount of lactic acid in 9.99g of yoghurt = 1.29 x 10-3 mol Mass of lactic acid in 9.99g of yoghurt = (amount of lactic acid) x (molar mass of lactic acid) = (1.29 x 10-3)(90.08) = 0.116 g Concentration of lactic acid equivalent (in %w/w) in yoghurt = (mass of lactic acid in 9.99g of yoghurt) / (average mass of yoghurt) x 100% = (0.116) / (9.99) x 100% = 1.16% (w/w) From the results of this experiment in Table 2, we can see that titratable acidity is not equal to pH, and it shares an inverse relationship with pH, where pH = -lg[H+]. This is because lactic acid is an organic acid and hence it is a weak acid. As such, lactic acid only partially dissociates, giving a [H+] that is lower than the total lactic acid concentration. This is due to the low acid dissociation constant, Ka, of lactic acid. However, by proportionality, it is observed that higher concentrations of lactic acid molecules will give a higher deprotonated [H+]. This is observed in Table 2 where the lower pH of yoghurt corresponds to a higher average volume of NaOH required to neutralize the lactic acid present. In addition, another observation is that yoghurt requires more than twice the volume of 0.1M NaOH to neutralize the lactic acid present as compared to sour cream even though yoghurt is lower in pH by 0.11. This is mainly attributed to the presence of probiotics added into yoghurt. As such, this means that more lactose in yoghurt is converted into lactic acid, resulting in the marked difference in average vol. of NaOH required for neutralization. This second observation also proves that pH is not a true measure of total lactic acid content in dairy products as this small difference in pH is accompanied by a larger than proportionate difference in volume of NaOH required for neutralization. Experiment 3: Titratable Acidity of Lemon Curd Table 3: Titration of lemon curd against 0.105M NaOH Sample mass of sample (g) average mass of sample (g) initial burette reading (ml) final burette reading (ml) vol. of NaOH used (ml) average vol. of NaOH used* (ml) Lemon Curd 10.00 10.00 50.00 29.20 20.80 20.35 10.00 29.20 8.90 20.30 10.00 50.00 29.60 20.40 *As 3 sets of titration were conducted for each sample in order to improve the precision and reproducibility of the titration results, the average volume of NaOH was taken as the average of the 2 closest values of vol. of NaOH used in titration so as to be more precise. C Na+O- O CH 2 C OH C O- Na+ O CH 2 C O- Na+ O C HO O CH 2 C OH C OH O CH 2 C OH O + 3NaOH Ã   + 3H2O (2) Amount of NaOH used = (Average vol. of NaOH used) x [NaOH] = (20.35/1000)(0.105) = 2.14 x 10-3 mol From (2), citric acid : NaOH is 1:3 amount of citric acid in 10.00g of lemon curd = (amount of NaOH used) / 3 = 7.13 x 10-4 mol Molar mass of citric acid = 6(12) + 8(1) + 7(16) = 192 g mol-1 mass of citric acid in 10.00g of lemon curd = (amount of citric acid) x (molar mass of citric acid) = (7.13 x 10-4)(192) = 0.137 g Concentration of citric acid equivalent (in % w/w) in lemon curd = (mass of citric acid in 10.00g of lemon curd) / (average mass of lemon curd) x 100% = (0.137) / (10.00) x 100% = 1.37% (w/w) As calculated above, the concentration of citric acid equivalent in lemon curd is 1.37% (w/w), which is well above the minimum standard of 0.33% (w/w) set by legislation in some parts of the world. Hence, it can be deduced that this sample of lemon curd has passed the quality control measure. Citric acid is used as the reference for quality control of lemon curd mainly because citric acid is present in the largest quantity in lemons. Hence, measuring citric acid concentration present will be a good measure of the quality of the lemon curd. As such, this is a quality lemon curd sample. Even though this lemon curd product expired on February 2012, the citric acid content should not be significantly affected by microbial decomposition mainly because the acidic environment due to citric acid is not suitable for most bacteria to thrive. Discussion There are a few experimental procedures which can be improved on. Firstly, as mentioned in the results of experiment 1, the faint pink observed to mark the end-point of titration is subject to a large margin of human error. As such, a better method to solve the issue of colour subjectivity is to use a colorimeter to determine an intensity of pink as the end-point of titration, thus eliminating any inaccuracies that result from human error. Secondly, it was observed that the dilution of products of a more viscous consistency, such as sour cream and lemon curd, did not yield a homogenous consistency as compared with the milk samples and yoghurt. As such, the titrated NaOH may not have actually reacted with all the acid molecules as some acid molecules may be trapped inside the granular particles. This can be overcome by vortexing the cream and water mixture in a sealed round-bottom conical flask to ensure a homogenous solution is obtained, allowing us to obtain more accurate titration results. Thirdly, for runny liquid samples such as milk, there is a risk of spillage due to splashing when the magnetic stirrer operates probably due to the large exposed opening of the porcelain basin. Splashing can be overcome by using a conical flask to contain the samples and place a white tile under the conical flask so that the change in colour of milk can be made more obvious. This is because a conical flask has a much narrower neck and therefore a significantly narrower opening, thus minimizing spillage from splashing. In this way, more accurate titration results can be obtained. For lemon curd, simply measuring the citric acid concentration is insufficient to conclude a quality product. This is mainly due to the possibility of adulteration of lemon curd by adding more citric acid chemical, just like how milk was adulterated by the adding melamine. As such, additional qualitative methods can be employed, such as measuring the concentration of certain chemical substances more unique to lemon, such as limonene. Turbidity test for pasteurized, UHT and sterilized milk Materials Ammonium sulphate powder Pasteurized milk UHT milk Sterilized milk Method 4.0g of ammonium sulphate, (NH4)2SO4, was dissolved in 20.0 ml of pasteurized milk. The mixture was allowed to stand for at least 5 min and subsequently filtered. 5 ml of the filtrate was collected in a test-tube and then placed in boiling water bath for at least 5 min. The test-tube containing filtrate was then cooled in cold water and the contents were examined for presence of turbidity. Results Discussion Table 4: Turbidity test results Sample Observation Pasteurized milk A cloudy pale yellow solution with precipitation was observed. UHT milk A cloudy pale yellow solution was observed. Sterilized milk A clear pale yellow solution was observed. The turbidity test is useful in telling us if a sample of milk is sufficiently sterilized, whereby a clear solution will be observed. The turbidity test is first carried out by adding a denaturing agent, usually ammonium sulphate, (NH4)2SO4, to the milk sample. As NH4+ exhibits acidic properties, as shown in the following equation, NH4+ + H2O Ã   NH3 + H3O+ this addition of ammonium ions will bring about an increase in [H+], resulting in the disruption of casein micelle structure. This causes casein proteins to precipitate and coagulate as they interact with the ammonium and sulphate ions. For those casein and whey proteins that are already denatured by heat treatment during processing, ammonium and sulphate ions will form interactions with the charged R-groups of the acidic and basic amino acid residues, causing them to precipitate out of the solution. These precipitate are obtained as the residue from filtration. The filtrate obtained contains mostly undenatured whey proteins and probably some unprecipitated protein molecules encapsulated in the casein micelle structure amidst a solution of ammonium sulphate and other soluble milk products such as lactose. Upon heat treatment in a 100oC water bath, the milk proteins denature and are thus exposed to ammonium sulphate. They undergo the same mode of action with ammonium sulphate as described above, resulting in the observed precipitation. Referring to AVA regulations, pasteurised milk is defined to be milk that has been subjected to a single heat-treatment of 62.8 65.6oC for at least 30 min or 72 73.5oC for at least 15 s; UHT milk is defined as milk that has been heated at a temperature of at least 135oC for at least 2 s; sterilized milk is milk heated to 100oC long enough to sufficiently kill all microbes. As such, sterilized milk will have all the casein and whey proteins fully denatured and free in the milk due to prolonged heating. Whereas UHT milk will have a slight concentration of undenatured proteins present due to a short high heat treatment. For pasteurized milk however, it will contain the highest concentration of undenatured proteins due to lowest heat treatment temperature. Hence, the experimental observation in Table 4 clearly fits the hypothesis. On a side note, the yellow pale solution observed is most likely due to the Maillard reaction between lactose in and amino compounds in milk. Conclusion Titratable acidity and the turbidity test for milk is but only 2 out of the many methods that the milk processing industry employs to ensure that the heat treatments have produced milk that are safe for human consumption. The main disadvantage that lies with milk treated with higher heat processes is the loss of flavour. The nutrients that are lost during heat are usually replaced (e.g. enriched milk) and hence this is less of a concern for milk. As such, it is the companys decision on whether to process milk with an emphasis on taste or shelf-life. Nevertheless, it is of utmost importance that the milk products remain well within the margin of safety as stated by regulations. At the same time, regulatory bodies need to stay alert and play a part in ensuring that companies follow the safety guidelines, less an incident like the adulteration of dairy products through melamine addition may occur again.

Do You Advocate Or Oppose Social Media? Essay

Advocates of the Social Media say that these communities facilitate social and political change; offer teachers, librarians, and students valuable access to educational support and materials; promote increased interaction with friends and family and broadcast useful information rapidly. Opponents say that these sites alter children’s brains and behavior; waste time on frivolous activity; prevent face-to-face communication; expose users to predators like pedophiles and burglars and spread false and potentially dangerous information. In this paper I will give a brief history of the Social Media and will also enumerate in an unbiased way some pros and cons of the Social Media. History of the Social Media SixDegrees.com, which existed from 1997-2001, is considered the first social networking site because it allowed users to create personal spaces and connect to friends online. Friendster, created in 2002, popularized social networking in the United States but was quickly outpaced by other social networking sites like: MySpace (2003), Facebook (2004), Twitter (2006), Pinterest (2009), and Google+ (2012). Facebook reported one billion monthly users worldwide on October 4, 2012, making it the most popular social networking site with one in seven people on the planet using the site. Every day, Facebook manages 2.7 billion â€Å"Likes,† 300 million photo uploads, and 2.5 billion status updates and check-ins. Twitter, the second largest social networking site, had an estimated 107.7 million users in the United States (as of Jan. 31, 2012) and 500 million worldwide users (as of Sep. 28, 2012). Pinterest is the third largest social network with 23 million unique visitors in July 2012, followed by LinkedIn, Tagged, Google+, and MySpace. 59% of all Internet users use at least one social networking site and 56% of social networking users are female. Social Media Pros Social networking sites spread information faster than any other media. Over 50% of people learn about breaking news on social media. 65% of traditional media reporters and editors use sites like Facebook and LinkedIn for story research, and 52% use Twitter. Social networking sites are the top news source for 27.8% of Americans, ranking close to newspapers (28.8%) and above radio (18.8%) and other print publications (6%). Twitter and YouTube users reported the July 20, 2012 Aurora, CO theater shooting before news crews could arrive on the scene, and the Red Cross urged witnesses to tell family members they were safe via social media outlets. (Hughes & Pesce, 2012). Law enforcement uses social networking sites to catch and prosecute criminals. 67% of federal, state, and local law enforcement professionals surveyed think â€Å"social media helps solve crimes more quickly.† In 2011 the NYPD added a Twitter tracking unit and has used social networking to arrest criminals who have bragged of their crimes online. When the Vancouver Canucks lost the 2011 Stanley Cup in Vancouver, the city erupted into riots. Social media was used to catch vandals and rioters as social networking site users tagged the people they knew in over 2,000 photos posted to the sites. (Global Post, 2012). Social networking sites help students do better at school. 59% of students with access to the Internet report that they use social networking sites to discuss educational topics and 50% use the sites to talk about school assignments. After George Middle School in Portland, OR introduced a social media program to engage students grades went up by 50%, chronic absenteeism went down by 33%, and 20% of students school-wide voluntarily completed extra-credit assignments. (Delmatoff, 2010). Social networking sites allow people to improve their relationships and make new friends. 70% of adult social networking users visit the sites to connect with friends and family, and increased online communication strengthens relationships. 52% of teens using social media report that using the sites has helped their relationships with friends, 88% report that social media helps them stay in touch with friends they cannot see regularly, 69% report getting to know students at their school better, and 57% make new friends. (Common Sense Media, 2012). Social media helps empower business women. Being able to connect on social networking sites gives business women a support group not readily found offline where female CEOs of Fortune 500 companies are outnumbered by male CEOs 15 to 485. Many social media sites are dominated by women: 72% of Pinterest users are women, 58% of Facebook users, 62% of MySpace users, 60% of Yelp users, and 53% of Instagram users. Business women useTwitter chats to support each other, give and receive peer knowledge, and have guest â€Å"speakers† share expert knowledge. One.org helps African women entrepreneurs connect on social media to grow their businesses. (One.org, 2012). Social media sites help employers find employees and job-seekers find work. 64% of companies are on two or more social networks for recruiting because of the wider pool of applicants, more efficient searches, and no need for an outside recruiter. 89% of employers have hired employees through LinkedIn, 26% through Facebook, and 15% through Twitter. One in six job-seekers credit social media for helping find their current job. 52% of job-seekers use Facebook for the job search, 38% use LinkedIn, and 34% use Twitter. (Jobvite, 2012). Social Media Cons Social media enables the spread of unreliable and false information. 49.1% of people have heard false news via social media. On Sep. 5, 2012 false rumors of fires, shootouts, and caravans of gunmen in a Mexico City suburb spread via Twitter and Facebook caused panic, flooded the local police department with over 3,000 phone calls, and temporarily closed schools. Shashank Tripathi, tweeting as @ComfortablySmug, spread false information in the aftermath of Hurricane Sandy by posting on Twitter that the New York Stock Exchange was flooding and that the power company would cut off electricity to all of Manhattan; the bogus information was picked up by national news outlets including CNN and the Weather Channel. (Laird, 2012). Social networking sites lack privacy and expose users to government and corporate intrusions. 13 million users said they had not set or did not know about Facebook’s privacy settings and 28% shared all or nearly all of their posts publicly. The US Justice Department intercepted 1,661 pieces of information from social networking sites and e-mails in 2011. The 2009 IRS training manual teaches agents to scan Facebook pages for information that might â€Å"assist in resolving a taxpayer case.† 4.7 million Facebook users have â€Å"liked† a health condition or medical treatment page, information that is sometimes used by insurance companies to raise rates. (Nance-Nash, 2011). Students who are heavy social media users tend to have lower grades. Students who use social media had an average GPA of 3.06 while non-users had an average GPA of 3.82 and students who used social networking sites while studying scored 20% lower on tests. College students’ grades dropped 0.12 points for every 93 minutes above the average 106 minutes spent on Facebook per day. Two-thirds of teachers believe that social media does more to distract students than to help academically. (Lanir, 2012). Social networking sites can lead to stress and offline relationship problems. A University of Edinburgh Business School study found the more Facebook friends a person has, the more stressful the person finds Facebook to use. According to a Feb. 9, 2012 Pew Internet report, 15% of adult social network users had an experience on a social networking site that caused a friendship to end, 12% of adult users had an experience online that resulted in a face-to-face argument, and 3% of adults reported a physical confrontation as the result of an experience on a social networking site. (Rainie, Lenhart & Smith, 2012). Social networking sites entice people to waste time. 40% of 8 to 18 year olds spend 54 minutes a day on social media sites. 36% of people surveyed listed social networking as the â€Å"biggest waste of time,† above fantasy sports (25%), watching TV (23%), and shopping (9%). When alerted to a new social networking site activity, like a new tweet or Facebook message, users take 20 to 25 minutes on average to return to the original task. In 30% of cases, it took two hours to fully return attention to the original task. 42% of American Internet users play games like Farmville or Mafia Wars on social networking sites. (Willis, 2012). Using social media can harm job stability and employment prospects. Job recruiters reported negative reactions to finding profanity (61%), poor spelling or grammar (54%), illegal drugs (78%), sexual content (66%), pictures of or with alcohol (47%), and religious content (26%) on potential employees’ social media pages. Anthony Weiner, former US Representative, was forced to resign after a Twitter sexting scandal in 2011. Several athletes were banned from the 2012 Olympics because of their racist social media posts. (Recuero, 2012). Conclusion After reviewing this information, do you see yourself as an advocate or opponent of the Social Media? Do you believe that the Social Media facilitates social and political change, is valuable to education, promotes relationships and broadcasts useful information rapidly? Do you believe the Social Media alters children’s behavior, is a waste of time, prevents personal communication, is a useful tool for predators and burglars and spreads false information? I see myself as neutral in regards to either advocating or opposing the Social Media. I do see positive things coming from the Social Media, but also see negative things. I believe is a matter of doing research and not taking all information the Social Media bombards us with as factual information. It’s a personal choice, either we advocate the Social Media or oppose it. The decision is up to you. References Bosker, B. (2012) Fortune 500 List Boasts More Female CEOs Than Ever Before. Retrieved January 6, 2013 from http://www.huffingtonpost.com/2012/05/07/fortune-500-female-ceos_n_1495734.html. Common Sense Media. (2012). Social Media, Social Life: How Teens View Their Digital Lives. Retrieved January 6, 2013 from http://www.commonsensemedia.org/research/social-media-social-life. Dalke, R. (2011). Social Media Case Study: The Stanley Cup Hockey Riots. Retrieved January 6, 2013 from http://www.freshnetworks.com/blog/2011/06/social-media-case-study-the-stanley-cup-hockey-riots/. Delmatoff, E. (2010). How Social Media Transformed Our

Explore how Tommo and Charlie’s relationship develops over the course of the novel Essay

Over year 8 I have been reading private peaceful, the book by Michel Morpurgo. In the story the maid character is a boy called Tommo who has an older brother called Charlie and another one called Big Joe along with their mother. Tommo looks up to Charlie and them always look out for each other. When Tommo goes to school he found makes a friend at school called Molly and both Charlie and Tommo fall in love with her. Later I the book Molly give birth to a beautiful, bouncing baby boy whose father is Charlie and Tommo wished he could let out a secret that he has kept since his father sadly passed away. In this essay I will be writing about Tommo and Charlie’s relationship and why Tommo believes he lives in Charlie’s glow during the story. The first part of Tommo and Charlie’s relationship I am going to concentrate on is when they were at school. Tommo looks up to Charlie as a father or the man of the house but also because Charlie always looks out for Tommo one example of this is when they were in the school yard Tommo got in a fight and Charlie took over and for his punishment him and jimmy pearsons got the cane jimmy kept crying â€Å"Ow, sir! Ow, sir! Ow. Sir!† but when it was chalies turn all we hear â€Å"are the whacks, and then the silences between†Ã¢â‚¬ ¦ this is one of the reasons why I have â€Å"the bravest brother in the world.† When Tommo first met molly he and molly had a very strong relationship and they still did when Charlie got friendly with her but as molly was two years older than him and Charlie was older by three â€Å"they always ran faster than i did.† And sometimes I felt like â€Å"they wanted to be without me†¦ I was feeling miserable and abandoned† soon this all got worse when Tommo finds out Charlie was in a relationship with molly. â€Å"I was so filled with anger and resentment towards him that I never wanted to speak to him again, nor to molly come to that.† Tommo by now is probably thinking what would Charlie so that to me? The one lad I look up to I cannot trust anymore he knows I love molly so why did he do this?

Grover Cleveland essays

Grover Cleveland essays Grover Cleveland was born March 18th, 1837 in Caldwell, New Jersey. He was the fifth child in the family of four brothers and five sisters. His fathers name is Richard Falley Cleveland, who was a Presbyterian minister and relative to the founder of Cleveland Ohio. Grovers mother, Ann Neal Cleveland was the daughter of a publisher. The family had little money and moved frequently. He attended schools such as Fayetteville and Clinton, New York, and began working at the age of 14 as a clerk for Fayetteville general store. When Grover was 16, his father died, leaving him and his brothers to support their mother and sisters. Cleveland joined with an older brother of his who was teaching at the New York Institution for the blind and worked there for a year. At 17 years old, Grover decided to head west for more opportunities. He wanted to settle in Cleveland Ohio, but instead stopped at Buffalo N.Y. to see his mothers uncle. His uncle persuaded him to stay and Grover worked with him for six months. Afterwards he decided to be a lawyer. He worked as a clerk in the law office of Rogers Bowen, and studied there. Working hard for $4.00 a week, which had to pay for room board at the home of a fellow clerk. Two of Grovers brothers served in the Union Army during the Civil War, Cleveland had to stay and support his mother and sisters. Cleveland entered in the politics scene as a ward worker for the Democratic Party in Buffalo. He served as a ward supervisor in 1862 and as an assistant district attorney of Erie County. Was elected sheriff in 1870. The city of Buffalo at the time had a corrupt administration. As demand for improvement grew, the quicker Grover was elected to run as mayor in 1881. Cleveland vetoed so many padded city contracts that he became known as the veto mayor. Clevelands reputation for good government made him a national figure. The Republ ...

History of Punk Rock Essay Example

History of Punk Rock Essay Example History of Punk Rock Essay History of Punk Rock Essay Punk Rock, which began in the mid 1970’s, began as a fad and quickly became a phenomenon that changed the music industry forever. Punk Rock was a new sound that came from a combination of rock and pop music. Punk was very different from mainstream music and along with this new sound, an entire subculture started to form. The focus of this paper is on the early development of punk rock, the bands and musicians who started the new sound, the subculture that was influenced by the punk rock movement, the evolution of punk and the state of punk rock music today. Punk rock got its name from the slang word â€Å"punk†, meaning rotten and worthless (Maser 10). The term was used to describe this new type of music that was very different from mainstream pop and rock music. These new bands â€Å"had very little talent, wore crazy clothes, had outrageous hairstyles and carried with them a message of anti-authority† (Shively). There is no exact date for the birth of punk rock, though it has been around since the sixties. Most agree that it was sometime around 1974 when punk rock really began to develop into a music genre of its own (Black and Kismet). Some say punk rock began in New York City, while others believe it started in London. Punk rock bands were emerging in both places. By late 1976 â€Å"bands such as the Ramones in New York and the Sex pistols and the Clash, in London, were recognized as the vanguard of a new musical movement† (Jaffe). The following year punk rock began to spread around the world. Punk music was mostly being played in small local bars and nightclubs. Punk music â€Å"did not get much support from mainstream record labels and most music stores wanted nothing to do with it† (Maser 12). Punk rock fans and musicians tended to stick together and support each other. It was not uncommon for one band to borrow musicians from another. One very popular club in New York City that became a popular place for punk artists to meet and play was CBGB’s. The club’s owner, Hilly Kristal had a rule: â€Å"only rock bands with original music could play at his club†(Maser 30). Soon, hundreds of local bands from all around the area came to play. The New York scene was made up mostly of musicians with very little money who were â€Å"bored with pop music and wanted to make an artistic change† (Black and Kismet). The Ramones are generally considered to be the first band to play this new type of music. They were tired of music that they considered boring, so they began to put their own sound together. As Johnny Ramone, the guitarist for the Ramones, stated, â€Å"We were new at writing songs and new at playing our instruments, so we couldn’t write anything too complicated, really† (Leopold). Other bands that were emerging from the New York Punk scene also in the mid-seventies included The Velvet Underground, Patti Smith, The New York Dolls, and Iggy Pop. The Ramones directly influenced British punk and helped to start the punk rock scene in London (Jaffe). The Ramones played a fourth of July concert in London, which was attended by many members of future punk bands such as the Clash, the Damned, Generation X, Souxsie and the Banshees, and the very successful Sex Pistols. Sid Vicious and Johnny Rotten, two members of the Sex Pistols, are often refereed to as the â€Å"all time greatest punks, contributing not only to punk’s music, but to its fashion and style also† (Jaffe). Punk rock is really creative Rock and Roll music that is fun and upbeat. It is in-your-face music, but at the same time there is intelligence behind it (Jaffe). The instruments that were typically used to play early punk rock music included one or two electric guitars, an electric bass, and a drum. In the beginning, punk music usually only used a few chords per song. Many popular punk bands were often referred to as â€Å"three chord wonders† (Maser 15). Punk rock songs tended to be short. Most of the early punk rock songs were under two minutes long. The lyrics were usually shouted instead of being sung and were usually repetitions of short phrases. The lyrics were often blunt and to the point. They dealt with real-life issues such as government, crime, poverty and other social problems. â€Å"Punk rock redefined the music scene, and people who didnt have bands to identify with before, now had several that spoke to the reality of the worlds issues† (McCain, Legs and McNeil 25). By the late seventies and early eighties, punk rock had become a solid musical genre. The â€Å"punk subculture is often seen as a rebellious group of youngsters who often come from lower class dwellings and haven’t gotten the attention that they needed so they dye their hair, dress differently, and act differently† (Mazer 50). Actually, being punk is about being your own person. The â€Å"outrageous clothing and hairstyles were indicative of the youthful rebellion at the time, and stood as a way for punks to differentiate themselves from the masses† (Shively). Early punk fashion included ripped clothing held together by safety pins or tape. Over time tattoos, piercings, and metal studded accessories were also common for the musicians and their fans (McCain, Legs and McNeil 30). The style was about individual freedom and represented anti-authority. Punk viewpoints included a â€Å"do it yourself ethic, non-conformity, direct action, and not selling out† (McCain, Legs and McNeil 31). It was not about labels, getting attention, or trying to look cool in front of your friends. Punk rock continued through the eighties and influenced many other types of music genres, including â€Å"gothic rock, grunge, metal, and new wave† among others (McCain, Legs and McNeil 43). In 1989, a band called the Sweet Children appeared. They would soon change their name to Green Day, and start a new wave of music called pop punk (Cooper). Other bands included in this movement were blink-182, Eve 6, and the Offspring. It was the â€Å"pop punk explosion of the nineties that saw punk rock achieve its largest audience and most lucrative record sales† (Maser 10). The original punk musicians did not sell many records because they preferred to remain loyal to small labels. This was one of the first major differences between the new pop punk bands and the original punk rock bands. By the mid nineties the ideas that punk rock originally stood for were nearly gone. People began to lose sight of what the original movement meant to begin with. The newer more mainstream punk bands changed their image. The pop punk bands â€Å"focused their energy into positive topics, rather than using obscenities and shock technique to gain attention† (Maser 66). The musicians were also more musically talented in that they actually knew how to play their instruments. There were only a few true hardcore punk bands left. Punk rock finally gained acceptance by the world at large when punk bands began to gain admittance to the Rock and Roll Hall of Fame (Cooper). The first bands to enter the Hall of Fame were the Talking Heads and Ramones in 2002. The Clash was accepted in 2003 followed by The Sex Pistols in 2006. Punk rock started with just a few bands playing in a few small clubs. Musicians who were fed up with the rock and roll industry started looking for ways to get their music heard. The music was very simple and easy to play. It attracted fans that were rebellious and looking for ways to express themselves also. â€Å"The raw simplicity and honesty of punk rock makes it what it is† (Black and Kismet). Punk was not just a movement in music, but as a statement in fashion, art and politics. Punk rock has been forever changing and growing, and continues to influence new music genres today.

Process and Project Systems Essay Example | Topics and Well Written Essays - 5000 words

Process and Project Systems - Essay Example ome, visiting some bank, airport, railway station, bakery or a shopping mall, a school, college or a university, you will find the application of this very important machine every where. Now, with the advancement of science and technology, super computers have been developed which is the most advanced type of computers till now. Super computers carry out highly sensitive tasks such as in aeronautical laboratories, or space stations etc. This is a simulated project for the construction of Centre for Technology in Government (CTG) which has the area around 250,000 square feet. It is actually a facility that is exclusively designed to place world class super computers and nuclear weapon design staff. Since working on nuclear weapons is a highly a sensitive task, equally sensitive is the case with the construction of this CTG. This place is aimed to further the previous developments carried out in this field but in a safe and secure environment with professionalism. Since it is a large project that has to cater for the country’s current as well as the future needs, it is highly desirable that its construction should be done after pondering upon various aspects and their proper integration or link should be developed. from the point of view of a constructor, by integration I mean that there should be a thorough understanding of the previous needs as well as the prediction of the needs in the times to come i.e. fu ture; as it is a very costly project, the building should be constructed in a way that it remains workable in future, for example, if currently we need 10 super computers, the building should be designed to house 30 computers, no matter currently the space for 20 computers will be practically unused. This type of planning is necessary because at that time when 30 computers will be needed, there will be enough space to house them. On the contrary if it does not happen i.e. no space is left for future needs, then certainly a new CTG will be constructed; it will

Islamic Art and Architecture Essay Example | Topics and Well Written Essays - 3250 words

Islamic Art and Architecture - Essay Example Under caliphs 'Abd al-Malik, al-Wahid I and al-Wahid II, the sense of dynastic pride indulged through a heady consciousness of family power found its most public expression in ambitious building campaigns Between 690 and 750, architecture became a family business backed by the immense financial resources of the Islamic state swollen by the accumulated booty of the Arab conquests and by the taxation revenue which came pouring in at the disposal of the Umayyad builders. "There was both the will and the means to embark on grandiose building projects." Undue parochialism was avoided although there was the exclusivity of the massive building programme of the Umayyads in Syria: most favoured land in the Islamic empire, Damascus its principal city is the capital of the empire, agricultural installations, abundant wealth. Importing craftsmen and materials from the Byzantium to Aphrodito in Upper Egypt documents an Islamic corve system One governor provided money to cover living expenses of men to work on the Damascus mosque Stucco sculpture of Persian type, Iraqi techniques of vault construction, mouldings from south-eastern Anatolia, figural style in Coptic sculpture evidence style and building practice of Syria. Position of Syria draw inspiration from the major cultures yoked together to bring Graeco-Roman, Egypt, North Africa, Arabia, Mesopotamia and Persia. "The fact that those same Umayyads were not a family of local Syrian notables but the representatives of the greatest empire in the contemporary world gave their art a mission of the utmost seriousness." Forms and ideas of classical art were much better understood in Syria that entered the bloodstream of Islamic art resulting to familiar Western column... Undue parochialism was avoided although there was the exclusivity of the massive building programme of the Umayyads in Syria: most favoured land in the Islamic empire, Damascus its principal city is the capital of the empire, agricultural installations, abundant wealth. "The fact that those same Umayyads were not a family of local Syrian notables but the representatives of the greatest empire in the contemporary world gave their art a mission of the utmost seriousness." The helicoidal tower of the Ibn Tulun mosque in Cairo composed of a central cylinder around which twists an external stircase which Hillenbrand suggested to have originated from Zoroastrian Persia towers of the more ancient Mesopotamian ziggurat Abbasid art is much understood through Samarra as new way of carving surfaces called bevelled style and repetition of abstract geometric or pseudo-vegetal forms called arabesque were used as wall decoration Jawhar the Sicilian, commander of the Fatimid troops sent by the Fatimid Caliph Almuiz to conquer Egypt, founded Cairo in 358 AH / 969 SD and built Al-Azhar mosque, now including the Al-Azhar University It is characterised by major technical

Applicability of Multiculturalism or Melting Pot Theory Essay

Applicability of Multiculturalism or Melting Pot Theory - Essay Example As such, he identifies himself more with Chinese cultural orientation than that of being either a Mexican or an America. The concept of culture has evolved through time. It was initially viewed as an intriguing complex sociological framework since it reflects the elaborate interaction of values, attitudes, perceptions and behavior displayed by a particular society. Eventually, culture emerged as a more multifarious and dynamic view that encompasses theories of diversity and multiculturalism. In the United States, a land of opportunities, sociologists and experts in cultural theories have separate contentions regarding applying the concept of multiculturalism or respecting the retention of distinct and diverse cultures. I hereby believe that multiculturalism is more beneficial for America rather than merging cultures exemplified in the melting pot theory. The concept of multiculturalism has existed for a long time as manifested by people who migrated to the U.S. and share more than one cultural orientations (Wong; Chavez; Saleem). Its historical existence is proof that multiculturalism in the United States is beneficial; otherwise, regulations would have been enacted to curtail this. According to Linda Chavez in her discourse entitled â€Å"Demystifying Multiculturalism†, â€Å"multiculturalism is not a grassroots movement. It was created, nurtured, and expanded through government policy. Without the expenditure of vast sums of public money, it would wither away and die† (113). Chavez asserted that multiculturalism has long been practiced and validly supported by policy makers through encouraging people from different cultures to migrate. (My professor said this quote was used incorrectly, which means, this quote doesn’t fit in this paragraph.)Immigration policies in the United States have monitored and restric ted the number of people from different races who opt to reside in the country. There are regulations that assist in providing a balance in cultural forces that are seen to be beneficial in terms of contributions to economic, social, technological, and political growth. Chavez has asserted that multiculturalism encouraged educational institutions to focus on â€Å"bilingual education and other multicultural services† (2). Therefore, there are forces that spur economic activities driven by the increasing number of people from various cultures. Multiculturalism is also more beneficial in terms of contributing to diversity. In contrast to the melting pot theory, through multiculturalism, traditional values and norms are preserved. From the video entitled The Great American Melting Pot, the Statue of Liberty was shown to hold a book of recipes that show the melting pot to be comprised of people from diverse nationalities. However, the video does not clearly indicate that these pe ople lose their cultural identities in the process (Schoolhouse Rock). Chavez indicated that â€Å"a whole new industry of "diversity professionals" has emerged to help managers cope with the expected deluge of non-white workers† (1). Multiculturalism has created a demand for professionals to focus on training people to realize the benefits of employing diverse people in their workforce. Likewise, diversity has opened potentials for accommodating traditional values and learning to adapt to new ones. Tahir expressed her preference to practice the way of life in America, she still respected the tradition of pre-arranged marriage; where her parents would solicit potential suitors according to a predefined qualification. The suitors with most preferred qualifications would eventually be streamlined and would be the basis of selecting the favored husband. Likewise, Wong allegedly

History of Statistics Essay Example for Free

History of Statistics Essay The history of statistics can be said to start around 1749 although, over time, there have been changes to the interpretation of the word statistics. By the 18th century, the term statistics designated the systematic collection ofdemographic and economic data by states. In the early 19th century, the meaning of statistics broadened to include the discipline concerned with the collection, summary, and analysis of data. Today statistics is widely employed in government, business, and all the sciences. Electronic computers have expedited statistical computation, and have allowed statisticians to develop computer-intensive methods. The Word statistics have been derived from Latin word â€Å"Status† or the Italian word â€Å"Statista†, meaning of these words is â€Å"Political State† or a Government. Shakespeare used a word Statist is his drama Hamlet (1602). In the past, the statistics was used by rulers. The application of statistics was very limited but rulers and kings needed information about lands, agriculture, commerce, population of their states to assess their military potential, their wealth, taxation and other aspects of government. Gottfried Achenwall used the word statistik at a German University in 1749 which means that political science of different countries. In 1771 W. Hooper (Englishman) used the word statistics in his translation of Elements of Universal Erudition written by Baron B.F Bieford, in his book statistics has been defined as the science that teaches us what is the political arrangement of all the modern states of the known world. There is a big gap between the old statistics and the modern statistics, but old statistics also used as a part of the present statistics. During the 18th century the English writer have used the word statistics in their works, so statistics has developed gradually during last few centuries. A lot of work has been done in the end of the nineteenth century. At the beginning of the 20th century, William S Gosset was developed the methods for decision making based on small set of data. During the 20th century several statistician are active in developing new methods, theories and application of statistics. Now these days the availability of electronics computers is certainly a major factor in the modern development of statistics. * Statistics helps in providing a better understanding and exact description of a phenomenon of nature. * Statistical helps in proper and efficient planning of a statistical inquiry in any field of study. * Statistical helps in collecting an appropriate quantitative data. * Statistics helps in presenting complex data in a suitable tabular, diagrammatic and graphic form for an easy and clear comprehension of the data. * Statistics helps in understanding the nature and pattern of variability of a phenomenon through quantitative obersevations. * Statistics helps in drawing valid inference, along with a measure of their reliability about the population parameters from the sample data. * Actuarial science is the discipline that applies mathematical and statistical methods to assess risk in the insurance and finance industries. * Biostatistics is a branch of biology that studies biological phenomena and observations by means of statistical analysis, and includes medical statistics. * Business analytics is a rapidly developing business process that applies statistical methods to data sets (often very large) to develop new insights and understanding of business performance opportunities * Chemometrics is the science of relating measurements made on a chemical system or process to the state of the system via application of mathematical or statistical methods. * Demography is the statistical study of all populations. It can be a very general science that can be applied to any kind of dynamic population, that is, one that changes over time or space. * Econometrics is a branch of economics that applies statistical methods to the empirical study of economic theories and relationships. * Environmental statistics is the application of statistical methods to environmental science. Weather, climate, air and water quality are included, as are studies of plant and animal populations. * Epidemiology is the study of factors affecting the health and illness of populations, and serves as the foundation and logic of interventions made in the interest of public health and preventive medicine. * Geostatistics is a branch of geography that deals with the analysis of data from disciplines such as petroleum geology,hydrogeology, hydrology, meteorology, oceanography, geochemistry, geography. * Operations research (or Operational Research) is an interdisciplinary branch of applied mathematics and formal science that uses methods such as mathematical modeling, statistics, and algorithms to arrive at optimal or near optimal solutions to complex problems. * Population ecology is a sub-field of ecology that deals with the dynamics of species populations and how these populations interact with the environment. * Psychometrics is the theory and technique of educational and psychological measurement of knowledge, abilities, attitudes, and personality traits. * Quality control reviews the factors involved in manufacturing and production; it can make use of statistical sampling of product items to aid decisions in process control or in accepting deliveries. * Quantitative psychology is the science of statistically explaining and changing mental processes and behaviors in humans. * Statistical finance, an area of econophysics, is an empirical attempt to shift finance from its normative roots to a positivistframework using exemplars from statistical physics with an emphasis on emergent or collective properties of financial markets. * Statistical mechanics is the application of probability theory, which includes mathematical tools for dealing with large populations, to the field of mechanics, which is concerned with the motion of particles or objects when subjected to a force. * Statistical physics is one of the fundamental theories of physics, and uses methods of probability theory in solving physical problems. * Statistical thermodynamics is the study of the microscopic behaviors of thermodynamic systems using probability theory and provides a molecular level interpretation of thermodynamic quantities such as work, heat, free energy, and entropy.

Communication and Culture: The Benefits of Beginning Foreign Language Study Early :: Research Papers

Communication and Culture: The Benefits of Beginning Foreign Language Study Early As global awareness increases, American interest in the study of languages other than English increases apace. Unlike early programs which did not teach â€Å"languages†¦primarily to learn oral/aural communication, but to learn for the sake of being ‘scholarly’ or, in some instances, for gaining a reading proficiency in the foreign language† (Brown 18), the twentieth century began to focus on communicative goals, and a variety of new theories and methods for teaching were put forth. A common goal has emerged, and modern programs push students towards fluency. Therefore, more research is being conducted into the best possible ways to create competent communicators. The Longman Dictionary of Language Teaching and Applied Linguistics defines communicative competence as â€Å"the ability not only to apply the grammatical rules of a language in order to form grammatically correct sentences but also to know when and where to use these sentences and to whom† (Richards, Platt, and Platt 65). As scholars search for the best ways to achieve communicative competence, they emphasize the importance of beginning language study early. The critical period hypothesis first put forth by Lenneberg in the late 1960’s holds â€Å"that there is a limited developmental period during which it is possible to acquire a language†¦to normal, nativelike levels† (Birdsong, 1). At the most generous estimate, this critical period is thought to extend from the age of 2 only until puberty, and some estimates posit a much narrower window (for more information on the possible causes of the critical period, see Birdsong, 7-9). According to Krashen, Long, and Scarcella, although â€Å"adults and older children in general initially acquire the second language faster than young children (oldest-is-better for rate of acquisition), †¦child second language acquirers will usually be superior in terms of ultimate attainment (younger-is-better in the long run)† (574). This eventual attainment includes superior pronunciation skills (Fledge 101) when compared with learners who began their study later in life. Although â€Å"starting age determines the levels of [communicative] accuracy achieved, particularly in pronunciation† (Ellis qtd. in Nunan 41), beginning young has an additional advantage. The young learner has many years of schooling left in which to explore this new language, and â€Å"the number of years’ exposure contributes greatly to the overall communicative fluency of the learners† (Ellis qtd. in Nunan 41). Although the pace of the young learner may be slower than that of the older learner, â€Å"when language learning begins earlier, it can go on longer and provide more practice and experience, leading ultimately to greater fluency and effectiveness† (Curtain and Pesola, Languages and Children 3) than is generally achieved when study begins after puberty.

Othello – Act three scene three is one of the most important scenes in this play

Act three scene three is one of the most important scenes in this play; this is because it is the scene when we see Iago has successfully manipulated Othello into believing that Desdemona has not been faithful to him, this is very significant to the rest of the play as it affects everything Othello the main character thinks, feels and says from this point onwards. At the start we see a noble character, who by the end of the scene is left on his knees swearing revenge on his wife. Act three scene three is also the longest scene in the play, which reflects its importance because so much develops and evolves throughout this period. During act three scene three we can actually begin to see the importance of the scene to the rest of the play, as the plot really starts to move forward, this is once Iago has planted his seeds of suspicion in Othello's mind and starts to water them so that the suspicion will grow. This is a significant development in the play as we see Iago put the plans he spoke of in earlier soliloquies and asides into action. In act three scene three just as Cassio hurriedly leaves the room Iago says â€Å"Ha! I like not that† this is said to arose suspicion in Othello's mind as once this has been said Iago leaves Othello to ponder the various diabolical meanings provided within this short statement, which makes him quite agitated and irritable. At the end of the scene we also see a completely transformed Othello who uses vulgar language and crude animal imagery such as â€Å"I had rather be a toad and live upon the vapour of a dungeon. Than keep a corner in the thing I love for others uses. This is a clear influence of Iago upon Othello who know seems more violent. Towards the end of the scene the decided plan of action will be for Othello to kill both Cassio and Desdemona, we know this as he says, â€Å"I will withdraw to furnish me with some swift means of death for the fair devil. † This is linked to the rest of the play because we can see Iago's plan is starting to work, and that he has manipulated Othello enough to make him think Desdemona is unfaithful so much so he now wants to kill her, this shows a complete transformation in Othello's character. The scene is also important as it reveals the true extent of Iago's devilish nature and how he goes about putting it to use by manipulating Othello in way the audience would not have thought possible, he manages to tear Othello and Desdemona's seemingly strong relationship up within a relatively short period of time, although we have already seen this side of Iago before when he shouts to Barbantio in act one scene one â€Å"an old black ram is tupping your white yew. This reveals part of his racist crude ways as well as showing us how deceitful he truly is in as much as he is pretending Roderigo is saying these things, he also reveals the marriage of Othello and Desdemona to Barbantio behind their backs. By doing this early on the audience are immediately aware of Iago's deceitful nature. The quote also reveals Iago's racist ways and what he thinks of moors and non-Venetians. These comments he makes would shock a twenty first century audience, as we live in a multi cultural society and everybody should be treated equally within it, however a Elizabethan audience would not of been shocked due to the fact they thought black men were sexually charged predators as shown in many of the quotes. Other signs that Iago is a skilled manipulator is the way he persuades Othello of Desdemona's infidelity, he uses various techniques to do this, for a start he appears to let on more than he really knows, this makes Othello want to feed his suspicion. There are also points when fate plays a part in the proceedings such as when Iago receives a particular handkerchief, which was Othello's first gift to Desdemona, he then tells Othello that Cassio dropped it, this is the proof Othello requested. Iago then went on to make up a dream he said Cassio had of Desdemona in which Cassio started saying, â€Å"sweet Desdemona, let us be wary, let us hide our loves,† this completely enraged Othello, whilst Iago appeared to be getting a kick out of everything that was going on. He is also quick to point out Othello's cultural differences in an attempt to make him feel insecure and like an outsider this is revealed in the quote â€Å"They dare not show their husbands; their best conscience. † By saying this he is telling Othello that Venetian women are loose and that he does not know what they are like, as he is an outsider. Religious references are used a plenty during this scene an example is when Othello uses such phrases as â€Å"death and damnation† and â€Å"heavan and hell† it is a very important theme in the play. The fact people were very religious in the sixteenth century is very important as it appears Iago has no concern for his soul, he has no sense of shame or remorse which is quite a chilling thought. The reason this scene is so important is the complete transformation of Othello the main character from a dignified figure to a jealous rage, we can see how successful Iago was here as earlier we saw how noble and calm Othello was when confronted by Barbantio and he told him to put his sword away now at the end of act three scene three Othello has become extremely violent and less confident in his relationship with Desdemona. We are also able to see how Shakespearian tragedies work, clearly the hero moves from a state of happiness to misery and eventual death through some fault or weakness of their own in Othello's case his tragic weakness or flaw, can be linked to the theme of jealousy and honesty within the play, he is easily made to jump to conclusions through thoughts of jealousy when it comes to Desdemona's infidelity, he is also too open and trusting towards certain characters like Iago who take advantage. By the end of the scene Othello has been completely enraged and his stature and reputation turn for the worst seen mainly through his language, which was once poetic like, Othello's language was controlled and he was able to enthral an audience as he did with the duke when explaining his courtship with Desdemona. Towards the end he is left cursing using imagery of hell such as â€Å"death and damnation† which are clear influences of Iago. The point we see Othello has completely given up and lost faith in Desdemona is when he says â€Å"farewell tranquil mind† which is a clear indication of how he feels completely distraught. To make this scene stand out among the rest Shakespeare has been very clever with his dramatic devices and his use of them in particular the way people enter and exit, for example when Cassio exits hurriedly leaving Desdemona, which causes Othello to wonder why he left so hastily. There is also the matter of timing and when characters speak which causes an awful amount of dramatic intensity, as mentioned earlier the length of the scene is very significant to the rest of the play because it allows time enough for Iago to put his plan into action and to work Othello's trust. When talking about dramatic devices we must also mention the very important part of soliloquies and asides in which a character reveals their inner most thoughts and feelings, which leads to dramatic irony as the audience are already aware of plans and actions to be undertaken. In conclusion the fact that so much significant and crucial parts take place in act three scene three prove that it is very important to the rest of the play, as it really starts to develop the plot and themes we have seen growing throughout earlier scenes. It is especially important because of the fact we see such a tremendous change in Othello.

Communications: The Mechanistic Perspective Essay

‘Communication — – the process of transmitting and receiving ideas, information, and messages. The rapid transmission of information over long distances and ready access to information have become conspicuous and important features of human society, especially in the past 150 years.’ The encyclopedia definition of communication encompasses the ideas of exchanging a variety of messages with others. This is important to remember when looking at communications within an organization. The whole process of communications within organizations is very complex and is certainly one of the major factors in determining whether an organization will succeed or not. The following paper deals with the different types, influences and improvements within the realm of communications in organizations. Ways of conceptualizing communications It is necessary to look at the problem from many viewpoints to understand how communications are performed within an organization. These include psychological, systems-interaction, interpretive-symbolic, and mechanistic. All of these areas are very important to understand the ‘whole picture,’ but the focus of this paper will be in the mechanistic perspective. Mechanistic Perspective Information within an organization determines their ability to make informed decisions and the effectiveness of those decisions is based on the way they communicate. This mechanistic perspective on communications deals entirely with the message, the medium and factors that aid or detract from the process. In this model, communication is initiated by the sender through to the receiver. Each process is then broken down into bits of data that can be analyzed. The areas of importance are the ways in which the sender and receiver utilize perceptive processes to encode and decode the messages and  the fact that noise is in the system. Any message from a sender to a receiver would convey exactly what the meaning is intended in a perfect world. It is very important that the sender says exactly what they are trying to say and the receiver knows exactly what the sender is saying. The following example illustrates this point: Clear and concise is what is desired within a ship building contract. If the contract does not describe ‘exactly’ what is required, the contractor can get extra money for including those ‘extras’ during the building stages. The Irving led Saint John Shipbuilding organization has made much more than their original contract for building the Canadian Patrol Frigates due to these ‘arisings.’ It was even suggested that this was part of their contract plan from the beginning. In analyzing this situation, it was very difficult for the Canadian Department of National Defense (DND) to ask for everything because of the complexity of the contract, the number of personnel on the contract writing team, and the fact that many iterations were required for DND and parliament prior to letting the contract. In fact, the writing was started ten years prior to the contract being let, so technology had changed many of the basic assumptions about the type of work to be done. Verbal and Non-Verbal Communications Inherent to transmission of messages are the verbal and non-verbal cues which aid in helping to decode a message. Verbal cues are dependent on language. Nuances intrinsic to a language can make the decoding difficult if not impossible even by someone who uses the same language. This may be a local dialect or cross-country differences. Examples of cross-country differences would be English from England, Canada, and the United States. Each is the same language, but each has separate nuances that can make it very difficult to decipher by someone from another country speaking the same language. A personal example is asking for a washroom in Southampton, England, at a train station and being told that they did not have one. The word that I should have used was ‘toilet.’  Dialects within a country can make it impossible to understand the original message. Another personal example is attempting to decipher someone from northwestern Newfoundland; their dialect made it virtually impossible to understand. The point is to utilize the best transmission method in order to minimize the decoding difficulty for the receiver. Non-verbal cues are ‘those expressions of emotions and attitudes toward another person and in regulating the interaction between people.’ The text organizes the cues into seven categories and includes good examples, including: environment, proximity, posture, gestures, facial expressions, eye behavior and vocalics. One area missing within communications chapter was what the person is wearing, but was included in chapter 6, perception and performance evaluations. Many books advocate ‘dressing for success.’ Some examples include shopping, salesperson and the office. If you are going to shop at flea markets, dressing ‘down’ is a good way to start the bargaining process. A car salesperson should dress to show that he is successful, but not ostentatious. In my profession, I dress towards the client based on whether ‘suit and tie’ or ‘casual’ are the choice for the client’s organization. This non-verbal cue can aid in preparing the initial psychological base for the remainder of the conversation and ensure that it does not detract from the conversation while it is ongoing. Influences on Communication Physical and personal factors influence communications. Organizational design influences physical factors, which deals with layout of the office, networks for communications, and the media selected for the message. Personal factors include the differences between individual styles, men and women, and cultures. Organizational Design The design of the organization must be based on what the organization is attempting to accomplish. Technology can enable these designs to take on new meanings as methods become available to communicate as never before. The first place to look at is the design of the office. The typical office has space allocated based on position of the employee. A worker may be in a ‘bull pen’ type of environment whereas the president will have a large office to show their particular status. Two personal examples include the Ship Repair Unit and Deloitte and Touche Consulting Group. Each has a typical office layout; the workers are in offices with partitioned walls; managers have outer offices, some with windows; and the general manager has the largest, most pretentious office space. The communications tend to have very structured down and up paths. Methods of communications include computer email, voice mail, and written memos. ‘Most critically, however, the intelligent office building must clearly improve the quality of the workplace for the individual, representing a major philosophical change in the office design. After all, what is the electronically enhanced office intended to facilitate, if not the effectiveness, productivity, and well-being of the worker, and the ultimate effectiveness of the organization.’ Traditional organizational design ideas are being challenged with the concepts of tele-commuting and virtual companies and offices. Technology has enabled us to plug into the office place anywhere in the world utilizing advanced telecommunications and computer advances. Many offices now have flexible office areas for their workers where they can sit down, plug in a laptop and have a phone, desk, and general office requirements available. When they are at their other office locations, they simply plug in to that particular location. All of this is transparent to the sender or receiver of information from that individual. An example is an advertising agency where a friend of mine works for in Toronto which has other offices in New York and Chicago. When he commutes to  these offices, he has all of the these resources available to him. This is transparent to his clients, who just thinks he does a wonderful job from his home office in Toronto. The types of communications are similar, with more emphasis based on digital transmissions (email and voicemail). I utilize voice mail effectively when on a client site by having a location for clients to call in for me and I can vet and prioritize my calls. ‘Employment in the Information Age is undergoing a transformation which may cause as much dislocation as the move from farm to factories did in the 19th century. Studies predict that the ranks of those with alternative office arrangements will grow by 10 percent or more every year during the remainder of the decade.’ The virtual company challenges communications within an organization even greater than present designs. This entity has allowed small organizations to work as effectively through the use of advanced communications and allows larger companies to change the way they do business. Some of the requirements for a company to be effective in virtual space include: robust infrastructure for individual employees, including cellular phone, portable computer with communications; remote managing – how do you know the person is doing their work?; employees must have the correct attributes to make it all work. When it does work, it works very well. The employee is either on a client site or at home and is more effective A personal example is a company in which I was a co-owner. This virtual company was a computer consulting firm specializing in Microsoft Office Integration. We had a management team from within Nova Scotia (5 people), programmers from around North America, and clients from around the world. This organization was difficult to run from the perspective of handing off information and brain-storming, but was very good at allowing each employee to work in their space of choice to increase productivity. The majority of the clients were local; a firm handshake and the ability to look someone in the eye is still stronger than the pen and keyboard. The international clients tended to be software firms who were looking for someone to subcontract a small portion of a project. The reason the business ran  effectively was that the employees were suited to the environment. If the business was not as high tech orientated, I would be reluctant to state that it would work as effectively. The type of design of the organization must be orientated to their mission. As the communication network characteristics shows , the different types of networks are good at some things and poor at others. The tradeoffs are usually flexibility and satisfaction against errors with simple tasks. Risk to human life or catastrophic failure was a point missing in network design. The text makes a number of good points about network design, but did not have an organization with strong lateral dissemination of information. This is important in more and more organizations as downsizing is taking out layers of middle managers, the overall manager cannot control or handle all of the information volume, but the job must still be done. The new managers require a horizontal flow of communications to get their job done. Personal Factors The personal factors within communications are more difficult to define. Consequently, they are also more difficult to improve upon. The text outlines very briefly some of those topic areas, including individual difference, culture differences, and male and female differences. Listening and Responding Noise is another area that inhibits or distorts the transmission of a message. The text deals with ways to be more effective in listening and responding to messages. A way to further analyze the effects of noise and barriers to communications within organizations is to study communications systems utilizing radio frequency (RF) transmissions; they have well documented aspects of noise  which can be analogous to other mediums. Modulation is the technique of employing information (the message) on a carrier signal and sending that signal to the receiver who then decodes it and gets the original transmission. Noise is what distorts that transmission. Different types of modulation techniques are utilized to cut down on the noise inherent to the medium utilized. Analog and digital communications employ all of the different types of modulation. The easiest modulation type (within the electronics) is amplitude modulation (AM) but which has the highest degree of susceptibility to noise. This is based on noise thresholds and the fact that background noise can be so loud that the original message is lost. This is analogous to trying to tell somebody an important message in a busy, noisy room. The background ‘din’ can make the message almost impossible to hear and understand properly. The second technique is frequency modulation (FM) which is more difficult to encode and decode, but is less susceptible to noise. This is because the natural noises the stratosphere produces are not over broad frequency ranges. Phase based modulation employs similar techniques, but uses phase differences to encode the information. This is analogous to listening to FM radio, which is close to what the original sounds like, but still seems weak in comparison to the ‘real thing.’ Digital communications employ the same modulation techniques as analog communications, but have distinct advantages in conveying messages over analog systems. Analog transmissions have no discrete data; it is all based on ramps of information. This would be analogous to the difference between an analog speedometer and a digital one. The analog would give you a continuous representation, but has no distinct breaks; the digital speedometer can only show you discrete amount of speed indications. In a digital system, the discrete data is only ‘on’ or ‘off’. This makes it much easier to distinguish the actual data from the noise because the threshold between the two can be much greater (the terminology used is decibels – the difference between the receiving message and the noise). This discrete data can be manipulated to ensure that the message is correct; this is referred to as error correction. A communications system analogous to this would be downloading information off the Internet and it error-checking at the receiver’s end to ensure the file is correct. The situation analogous to this entire noise discussion is that we would normally write something down if it was critical in order to ensure the information is transmitted correctly (digital systems). If we are not worried about errors in transmission, we will convey our message through speech (analog systems). The other points, including fatigue, time pressure, selective listening, status, value judgments, and source credibility are very good observations on the barriers to messages. An example of using listening and responding within communications was the idea that I based my first company on; producing multimedia applications. What possessed me to orient myself in that direction in 1991 was a statistic from the MIT media lab: 10% of people remember what they hear, 20% remember what they read and 65% remember what they interact with. One area that was missing in the text discussion was that you can get people to remember by interacting with the message. This could be in the form of CD-ROM computer based training, seminar, or one-on-one where the person is forced to think about the information being presented. Application of Communications A good example of multiple types of communications within an organization is within a warship. A personal example is H.M.C.S. Nipigon; a Canadian destroyer based in Halifax, Nova Scotia. The primary purpose for a destroyer is for a weapons platform in which the Government of Canada can utilize to direct their policy. The organization must be robust enough to handle multiple contingencies, including loss of life, loss of systems, and loss of communications. There is redundancy within departments (supply, engineering, operations) in order  to minimize losing one critical person. Therefore, network design facilitated this by placing the key personnel at different areas in the ship during war time situations.. There are multiple ways to power systems via primary and backup power supplies. Again, to keep communications open within the systems in order to keep the vessel floating and fighting. There are also multiple ways for external and internal communications to occur. The communications control room (CCR) can patch a multitude of apparently dissimilar systems, including telephones, radios, and digital computers. To minimize errors, the organization has a strict hierarchy with instructions as to the types of information to be handled by each person with the organization and how it will be distribu ted. This is related to the network design and the media types for information. The crew will train repeatedly in order to minimize errors. This is related to how to minimize the noise within the system. In this case, the noise would be the amount of information available and the filter would be the voice procedures that personnel must utilize to talk both internally and externally. This is of vital importance if there are situations happening internally, including fires and floods, and externally, including incoming missiles, planes, ships and submarines. The communication does not stop within the ship. Depending on the scenario, it could be a contingency of Canadian warships, NATO warships, or another conglomeration where various platforms. Inputs could be coming from satellites, helicopters, intelligence, other ships, and planes. There are strict communications protocols and transmission types for this exchange of information employing cryptography and error correction in order to minimize the chance for error. Multiple forms of communications are at work in this scenario, but the reason it all works is due to the design of the organization. Critique This chapter on communications dealt primarily with the mechanistic perspective. The other areas are needed to balance this sole focus on linear communications. Within the mechanistic approach, there were some areas which were missing which I deemed vital. These included the network flow of the large horizontal organization, importance of reducing errors in mission  critical processes, and the application of technology. Communications in organizations having large horizontal movement of information is critical to its success. As previously stated, the reduction of errors can be critical to human life and also to the success of an organization. Technology enablers have evolved so quickly that the types of hardware and software the authors talk about have changed. Concurrent engineering is a term used to describe 24 hour production of engineering problems by handing over the problems to destinations throughout the world. Bell Northern Research utilizes this technique to dramatically improve their time to market for products. Not enough research was placed into the way new companies (virtual companies) can communicate more effectively. The world is getting smaller as communications become more effective and this text should reflect more of that type of communication.